John Tate John Tate's Profile Page

John Tate John Tate

0 Course Enrolled • 0 Course Completed

Biography

Palo Alto Networks NGFW-Engineer Test Torrent: Palo Alto Networks Next-Generation Firewall Engineer - Real4test Gives Warm Service & Excellent New Exam Simulator

Students often feel helpless when purchasing test materials, because most of the test materials cannot be read in advance, students often buy some products that sell well but are actually not suitable for them. But if you choose NGFW-Engineer test prep, you will certainly not encounter similar problems. Before you buy NGFW-Engineer learning question, you can log in to our website to download a free trial question bank, and fully experience the convenience of PDF, APP, and PC three models of NGFW-Engineer learning question. During the trial period, you can fully understand our study materials' learning mode, completely eliminate any questions you have about NGFW-Engineer test prep, and make your purchase without any worries. At the same time, if you have any questions during the trial period, you can feel free to communicate with our staff, and we will do our best to solve all the problems for you.

Palo Alto Networks NGFW-Engineer Exam Syllabus Topics:

Topic
Details

Topic 1

Integration and Automation: This section measures the skills of Automation Engineers in deploying and managing Palo Alto Networks NGFWs across various environments. It includes the installation of PA-Series, VM-Series, CN-Series, and Cloud NGFWs. The use of APIs for automation, integration with third-party services like Kubernetes and Terraform, centralized management with Panorama templates and device groups, as well as building custom dashboards and reports in Application Command Center (ACC) are key topics.

Topic 2

PAN-OS Networking Configuration: This section of the exam measures the skills of Network Engineers in configuring networking components within PAN-OS. It covers interface setup across Layer 2, Layer 3, virtual wire, tunnel interfaces, and aggregate Ethernet configurations. Additionally, it includes zone creation, high availability configurations (active
active and active
passive), routing protocols, and GlobalProtect setup for portals, gateways, authentication, and tunneling. The section also addresses IPSec, quantum-resistant cryptography, and GRE tunnels.

Topic 3

PAN-OS Device Setting Configuration: This section evaluates the expertise of System Administrators in configuring device settings on PAN-OS. It includes implementing authentication roles and profiles, and configuring virtual systems with interfaces, zones, routers, and inter-VSYS security. Logging mechanisms such as Strata Logging Service and log forwarding are covered alongside software updates and certificate management for PKI integration and decryption. The section also focuses on configuring Cloud Identity Engine User-ID features and web proxy settings.

>> NGFW-Engineer Test Torrent <<

New NGFW-Engineer Exam Simulator, NGFW-Engineer Reliable Guide Files

The 21 century is the information century. So there are many changes in the field of the NGFW-Engineer exam questions. They are also transforming people's lives and the mode of operation of human society in a profound way. when you are preparing for an NGFW-Engineer exam, our company can provide the best electronic NGFW-Engineer Exam Torrent for you in this website. I strongly believe that under the guidance of our NGFW-Engineer test torrent, you will be able to keep out of troubles way and take everything in your stride.

Palo Alto Networks Next-Generation Firewall Engineer Sample Questions (Q37-Q42):

NEW QUESTION # 37
Which CLI command is used to configure the management interface as a DHCP client?

A. set network dhcp type management-interface
B. set network dhcp interface management
C. set deviceconfig system type dhcp-client
D. set deviceconfig management type dhcp-client

Answer: D

Explanation:
To configure the management interface as a DHCP client on a Palo Alto Networks NGFW, the correct CLI command is set deviceconfig management type dhcp-client.
This command configures the management interface to obtain an IP address dynamically using DHCP.

NEW QUESTION # 38
Which configuration in the LACP tab will enable pre-negotiation for an Aggregate Ethernet (AE) interface on a Palo Alto Networks high availability (HA) active/passive pair?

A. Set passive link state to "Auto."
B. Set LACP mode to "Active."
C. Set "Enable in HA Passive State."
D. Set Transmission Rate to "fast."

Answer: C

Explanation:
In a High Availability (HA) active/passive pair configuration, when setting up an Aggregate Ethernet (AE) interface, enabling the "Enable in HA Passive State" option allows the interface to participate in LACP (Link Aggregation Control Protocol) even when the system is in the passive state. This ensures that the pre-negotiation of the LACP link occurs, allowing the link aggregation to be ready as soon as the firewall becomes active.

NEW QUESTION # 39
Which two zone types are valid when configuring a new security zone? (Choose two.)

A. Tunnel
B. Virtual Wire
C. Intrazone
D. Internal

Answer: A,B

Explanation:
When configuring a new security zone on a Palo Alto Networks firewall, the two valid zone types are:
Tunnel: A Tunnel zone is used for traffic that is associated with a VPN tunnel, such as IPSec tunnels. Traffic passing through a tunnel interface is classified into this zone.
Virtual Wire: A Virtual Wire zone is used when a firewall operates in transparent mode (also known as Layer 2 mode). In this configuration, the firewall can inspect traffic without modifying the IP address structure of the network.

NEW QUESTION # 40
After an engineer configures an IPSec tunnel with a Cisco ASA, the Palo Alto Networks firewall generates system messages reporting the tunnel is failing to establish.
Which of the following actions will resolve this issue?

A. Ensure that an active static or dynamic route exists for the VPN peer with next hop as the tunnel interface.
B. Validate the tunnel interface VLAN against the peer's configuration.
C. Check that IPSec is enabled in the management profile on the external interface.
D. Configure the Proxy IDs to match the Cisco ASA configuration.

Answer: D

Explanation:
The Proxy IDs (or Traffic Selectors) define the local and remote subnets that are allowed to communicate over the IPSec tunnel. If the Proxy IDs on the Palo Alto Networks firewall do not match the configuration on the Cisco ASA, the tunnel will fail to establish because the firewalls won't agree on which traffic to encrypt. Ensuring that the Proxy IDs match between the Palo Alto Networks firewall and the Cisco ASA will resolve the issue.

NEW QUESTION # 41
What is a result of enabling split tunneling in the GlobalProtect portal configuration with the "Both Network Traffic and DNS" option?

A. It specifies which domains are resolved by the VPN-assigned DNS servers and which domains are resolved by the local DNS servers.
B. It specifies when the secondary DNS server is used for resolution to allow access to specific domains that are not managed by the VPN.
C. lt allows devices on a local network to access blocked websites by changing which DNS server resolves certain domain names.
D. It allows users to access internal resources when connected locally and external resources when connected remotely using the same FQDN.

Answer: A

Explanation:
When split tunneling is enabled with the "Both Network Traffic and DNS" option in the GlobalProtect portal configuration, it allows the firewall to control which traffic is sent over the VPN tunnel and which is not. Specifically, it determines which domains are resolved by the VPN-assigned DNS servers (for domains requiring VPN access) and which are resolved by local DNS servers (for domains that can be accessed without the VPN tunnel).

NEW QUESTION # 42
......

With a vast knowledge in the field, Real4test is always striving hard to provide actual, authentic Palo Alto Networks Exam Questions so that the candidates can pass their Palo Alto Networks Next-Generation Firewall Engineer (NGFW-Engineer) exam in less time. Real4test tries hard to provide the best Palo Alto Networks NGFW-Engineer dumps to reduce your chances of failure in the Palo Alto Networks Next-Generation Firewall Engineer (NGFW-Engineer) exam. Real4test provides an exam scenario with its Palo Alto Networks NGFW-Engineer practice test (desktop and web-based) so the preparation of the Palo Alto Networks Next-Generation Firewall Engineer (NGFW-Engineer) exam questions becomes quite easier.

New NGFW-Engineer Exam Simulator: https://www.real4test.com/NGFW-Engineer_real-exam.html